英语翻译This paper describes a new all-hardware technique for re
来源:学生作业帮 编辑:搜搜做题作业网作业帮 分类:英语作业 时间:2024/08/19 03:55:23
英语翻译
This paper describes a new all-hardware technique for real-time interface of standard DSP devices to analogue to digital converters
(ADCs),and an associated ASIC system that has been designed to implement the technique.The system is based on a double buffer approach
and uses a phase-locked loop unit to control its synchronous parts.It is appropriate for real-time implementation of DSP algorithms that use
the block processing approach.The double buffer is facilitated by two on-chip 1 k £ 16 k bit SRAM blocks,as appropriate for a predefined
data frame size of 1024 samples.The system facilitates continuous sampling of the incoming analogue signals,via an ADC,and stores the
data in one of the RAMs.Concurrently,the DSP retrieves data stored in the second RAM from previous sampling interval,and processes it.
The approach eliminates the need for interrupt service and data collection routines and thus alleviates the design burden of real-time DSP
systems with regard to software development.It also offers the advantage of utilising the full power of the DSP device and provides faster
processing and potentially higher and accurate sampling frequencies.The design described in this paper represents a discrete ASIC solution
for the digital core of the system.The digital core may,where appropriate,be integrated into a single SoC solution alongside a DSP core.
q 2002 Elsevier Science B.V.All rights reserved.
Block processing,where time-domain signal samples are
buffered into frames of data to be processed as a block,is a
well-known real-time digital signal processing technique
which offers significant performance particularly for
applications involving speech processing [11].In such
DSP systems,the interfacing of the digital signal processor
to the ADC and the data collection process are controlled by
an appropriate interrupt-based data collection routine.In
this arrangement,the DSP code consists of a main target
application program,a data collection routine and an
interrupt service routine with a pre-set timer interrupt [6].
Data collection is facilitated by interrupting the main
program at fixed time intervals defined by the setting of the
timer.Once a complete data frame has been collected,the
data is retrieved and processed by the DSP.When dealing
with large frames of data,this process involves a
considerable interruption delay.The digital signal processor
(DSP) required for such systems should have the ability to
perform two tasks simultaneously:(i) compute upon one
data frame while (ii) receiving samples that make up the
next.This switching between tasks means that the full DSP
processing power would not be utilised [1].On the other
hand,during the data processing,unless the sampling and
the processing tasks run concurrently,potentially critical
This paper describes a new all-hardware technique for real-time interface of standard DSP devices to analogue to digital converters
(ADCs),and an associated ASIC system that has been designed to implement the technique.The system is based on a double buffer approach
and uses a phase-locked loop unit to control its synchronous parts.It is appropriate for real-time implementation of DSP algorithms that use
the block processing approach.The double buffer is facilitated by two on-chip 1 k £ 16 k bit SRAM blocks,as appropriate for a predefined
data frame size of 1024 samples.The system facilitates continuous sampling of the incoming analogue signals,via an ADC,and stores the
data in one of the RAMs.Concurrently,the DSP retrieves data stored in the second RAM from previous sampling interval,and processes it.
The approach eliminates the need for interrupt service and data collection routines and thus alleviates the design burden of real-time DSP
systems with regard to software development.It also offers the advantage of utilising the full power of the DSP device and provides faster
processing and potentially higher and accurate sampling frequencies.The design described in this paper represents a discrete ASIC solution
for the digital core of the system.The digital core may,where appropriate,be integrated into a single SoC solution alongside a DSP core.
q 2002 Elsevier Science B.V.All rights reserved.
Block processing,where time-domain signal samples are
buffered into frames of data to be processed as a block,is a
well-known real-time digital signal processing technique
which offers significant performance particularly for
applications involving speech processing [11].In such
DSP systems,the interfacing of the digital signal processor
to the ADC and the data collection process are controlled by
an appropriate interrupt-based data collection routine.In
this arrangement,the DSP code consists of a main target
application program,a data collection routine and an
interrupt service routine with a pre-set timer interrupt [6].
Data collection is facilitated by interrupting the main
program at fixed time intervals defined by the setting of the
timer.Once a complete data frame has been collected,the
data is retrieved and processed by the DSP.When dealing
with large frames of data,this process involves a
considerable interruption delay.The digital signal processor
(DSP) required for such systems should have the ability to
perform two tasks simultaneously:(i) compute upon one
data frame while (ii) receiving samples that make up the
next.This switching between tasks means that the full DSP
processing power would not be utilised [1].On the other
hand,during the data processing,unless the sampling and
the processing tasks run concurrently,potentially critical
![英语翻译This paper describes a new all-hardware technique for re](/uploads/image/z/3577896-0-6.jpg?t=%E8%8B%B1%E8%AF%AD%E7%BF%BB%E8%AF%91This+paper+describes+a+new+all-hardware+technique+for+re)
这纸描绘a新完全-为标准DSP装置的向向数字的使转变的人((ADCs)和一已经是的结合ASIC系统相
似物实时-界面硬件技术设计执行技术.系统基于一双缓冲存储器接近的和使用阶段-使一个圈单
位不能动控制它的同时发生的零件.它是适合于使用块处理接近的DSP算法的实时-工具.双缓冲存
储器被二在-芯片1千上-方便£当为一预先定义数据占用1024样品的结构大小时,16千小块
SRAM堵住.系统方便经由一ADC进来的相似物信号的连续取样和在公羊之一中储藏数据.同时发生
地,DSP找回在从前一取样时间间隔第二随机存取存储中储藏数据和加工它.接近至于软件发展消
灭需要中断服务和数据收集例行工作和因此减轻设计实时-DSP系统的负担.它也建议使用的对DSP
装置的完整力量有利和提供更快处理和潜在地更高和准确取样频率.在这纸中描绘设计代表一分
离的ASIC系统的数字的核心的解决方案.数字的核心可以什么地方占用,是集成到一紧挨着一DSP
核心专一SoC解决方案中.q 2002Elsevier科学B.V.版权所有.块处理,那里时间-领土信号样品被
变为数据的结构当缓冲被是一块加工的是一特别给予重要表现的对于涉及讲话处理[[11]应用众
所周知实时-数字的信号处理技术.在这样DSP系统中,向ADC数字的信号处理器的内衬和数据收集
似物实时-界面硬件技术设计执行技术.系统基于一双缓冲存储器接近的和使用阶段-使一个圈单
位不能动控制它的同时发生的零件.它是适合于使用块处理接近的DSP算法的实时-工具.双缓冲存
储器被二在-芯片1千上-方便£当为一预先定义数据占用1024样品的结构大小时,16千小块
SRAM堵住.系统方便经由一ADC进来的相似物信号的连续取样和在公羊之一中储藏数据.同时发生
地,DSP找回在从前一取样时间间隔第二随机存取存储中储藏数据和加工它.接近至于软件发展消
灭需要中断服务和数据收集例行工作和因此减轻设计实时-DSP系统的负担.它也建议使用的对DSP
装置的完整力量有利和提供更快处理和潜在地更高和准确取样频率.在这纸中描绘设计代表一分
离的ASIC系统的数字的核心的解决方案.数字的核心可以什么地方占用,是集成到一紧挨着一DSP
核心专一SoC解决方案中.q 2002Elsevier科学B.V.版权所有.块处理,那里时间-领土信号样品被
变为数据的结构当缓冲被是一块加工的是一特别给予重要表现的对于涉及讲话处理[[11]应用众
所周知实时-数字的信号处理技术.在这样DSP系统中,向ADC数字的信号处理器的内衬和数据收集
英语翻译This paper describes a new all-hardware technique for re
英语翻译This paper describes the synthesis and characterization
英语翻译This paper describes an integrated approach into the des
英语翻译Abstract--This paper presents a new practical accelerate
英语翻译A new president with an ambitious agenda.That describes
This part describes the procedure for compiling a technical
英语翻译This paper describes the role of WHO in the development
英语翻译This paper proposes a domain statement for strategic mar
英语翻译a time-of-scan laser triangulation technique for distanc
英语翻译Abstract- In this paper,a new PWM contril scheme using a
英语改错习题求解答The new technique A(calls for) B(heating) the mixtu
英语翻译求牛人翻译啊!This paper examines a new criterion measure,compr