英语翻译1 切断交流电源后,伺服驱动器充电指示灯未熄灭前,表示伺服系统内部仍有高压,十分危险,请勿触摸内部电路及零部件.
来源:学生作业帮 编辑:搜搜做题作业网作业帮 分类:综合作业 时间:2024/07/03 09:06:05
英语翻译
1 切断交流电源后,伺服驱动器充电指示灯未熄灭前,表示伺服系统内部仍有高压,十分危险,请勿触摸内部电路及零部件.
2 机台接地端请务必正确接地.
3 严禁私自改装,更换控制板及零部件,否则有触电,机台错误动作等危险
4 请勿对机台内部的零部件进行耐压测试、机械零件用力敲打等,造成零件受损.
5 * 押出机主机电源线用3相380V,50平方以上的主电源线,须接地线
** 搅拌马达电源线接至电箱内,须接地线
*** 水槽下鼓风机马达电源线接至电箱内,须接地线
**** 接切粒机主电源线3相380V,须接地线
6 将变频器马达接线U.V.W任意两相调换即可
1 切断交流电源后,伺服驱动器充电指示灯未熄灭前,表示伺服系统内部仍有高压,十分危险,请勿触摸内部电路及零部件.
2 机台接地端请务必正确接地.
3 严禁私自改装,更换控制板及零部件,否则有触电,机台错误动作等危险
4 请勿对机台内部的零部件进行耐压测试、机械零件用力敲打等,造成零件受损.
5 * 押出机主机电源线用3相380V,50平方以上的主电源线,须接地线
** 搅拌马达电源线接至电箱内,须接地线
*** 水槽下鼓风机马达电源线接至电箱内,须接地线
**** 接切粒机主电源线3相380V,须接地线
6 将变频器马达接线U.V.W任意两相调换即可
1 切断交流电源后,伺服驱动器充电指示灯未熄灭前,表示伺服系统内部仍有高压,十分危险,请勿触摸内部电路及零部件.
2 机台接地端请务必正确接地.
3 严禁私自改装,更换控制板及零部件,否则有触电,机台错误动作等危险
4 请勿对机台内部的零部件进行耐压测试、机械零件用力敲打等,造成零件受损.
5 * 押出机主机电源线用3相380V,50平方以上的主电源线,须接地线
** 搅拌马达电源线接至电箱内,须接地线
*** 水槽下鼓风机马达电源线接至电箱内,须接地线
**** 接切粒机主电源线3相380V,须接地线
6 将变频器马达接线U.V.W任意两相调换即可
1 AC power supply cut off,the servo drive is not put out before the charging indicator light,said high-pressure servo-system is still very dangerous,do not touch the internal circuits and components.
2 client machine grounding grounding be sure to correct.
3,no unauthorized alterations,replacement panels and parts,or electric shock,machine moves,such as the risk of error
4 Do not machine parts and components for internal pressure testing,mechanical parts such as hard hit,resulting in damaged parts.
5 * Extruder mainframe power cord with 3-phase 380V,50 more than the square of the main power line,ground line shall be
** Stirring motor to electric power line access box shall be grounded line
*** Blower motor under the sink then the power cord to power the box,be grounded line
**** Then the main power line granulator 3 phase 380V,line to be grounded
6 Inverter UVW motor wiring can swap any two-phase
2 机台接地端请务必正确接地.
3 严禁私自改装,更换控制板及零部件,否则有触电,机台错误动作等危险
4 请勿对机台内部的零部件进行耐压测试、机械零件用力敲打等,造成零件受损.
5 * 押出机主机电源线用3相380V,50平方以上的主电源线,须接地线
** 搅拌马达电源线接至电箱内,须接地线
*** 水槽下鼓风机马达电源线接至电箱内,须接地线
**** 接切粒机主电源线3相380V,须接地线
6 将变频器马达接线U.V.W任意两相调换即可
1 AC power supply cut off,the servo drive is not put out before the charging indicator light,said high-pressure servo-system is still very dangerous,do not touch the internal circuits and components.
2 client machine grounding grounding be sure to correct.
3,no unauthorized alterations,replacement panels and parts,or electric shock,machine moves,such as the risk of error
4 Do not machine parts and components for internal pressure testing,mechanical parts such as hard hit,resulting in damaged parts.
5 * Extruder mainframe power cord with 3-phase 380V,50 more than the square of the main power line,ground line shall be
** Stirring motor to electric power line access box shall be grounded line
*** Blower motor under the sink then the power cord to power the box,be grounded line
**** Then the main power line granulator 3 phase 380V,line to be grounded
6 Inverter UVW motor wiring can swap any two-phase
英语翻译1 切断交流电源后,伺服驱动器充电指示灯未熄灭前,表示伺服系统内部仍有高压,十分危险,请勿触摸内部电路及零部件.
英语翻译高压危险 请勿触摸
电源内部怎么会有电流?
电源内部的电路指的是什么
平行板电容器充电后,切断电源与不切断电源的区别是什么?
都说RC电路能延时,我把电容串电阻后并在电源端,切除电源后观察后面的电路中的指示灯瞬间就熄灭了.
保护电路能吃么?详解移动电源内部电路
UPS电源内部电路需要锁相环电路么?
电源内部怎么会有电势降落?
外接电源有电压时,自动切断锂电池和后面电路的连接由外部电源供电并给电池充电,否则由电池供电的电路图
消毒柜总电源按下后,电源指示灯亮,上下层消毒按钮按下后,工作灯不亮,并且总电源指示灯熄灭,松开消毒按钮后,总电源指示灯亮
请教师傅们:电动车充电器,当插上交流电源,两个指示灯(电源指示灯和充电指示灯)都亮红灯,何故!