搜搜做题作业网英语翻译1.SPEC MII-A-2550 AND ANSI Y14.5M-1987 APPLY.2.MAT'L:BRA
来源：学生作业帮 编辑：搜搜做题作业网作业帮 分类：数学作业 时间：2024/07/01 07:32:23
英语翻译
1.SPEC MII-A-2550 AND ANSI Y14.5M-1987 APPLY.
2.MAT'L:BRASS,SINTERED,HIGH DENSITY,C2P-2002.MPF STRANDARD 35.DENSITY 7.7g/cm MIN.
3.BURRS IS NOT ALLOWED AND SHARP EDGES R0.12 MAX.
4.REJECT IF THE DIAMETER IS UNDERSIZE.ACCEPT DIAMETER OVERSIZE ONLY WHEN IT MEETS ASSEMBLY REQUIREMENTS.
5.GHT BURRS PERMITTED ON FACE ONLY.
1.SPEC MII-A-2550 AND ANSI Y14.5M-1987 APPLY.
2.MAT'L:BRASS,SINTERED,HIGH DENSITY,C2P-2002.MPF STRANDARD 35.DENSITY 7.7g/cm MIN.
3.BURRS IS NOT ALLOWED AND SHARP EDGES R0.12 MAX.
4.REJECT IF THE DIAMETER IS UNDERSIZE.ACCEPT DIAMETER OVERSIZE ONLY WHEN IT MEETS ASSEMBLY REQUIREMENTS.
5.GHT BURRS PERMITTED ON FACE ONLY.
1.规范：MII-A2550及ANSI Y14.5M-1987版本
2.材质：高密集黄铜,C2P-2002,标准：35,密度：最小为7.7g/cm
3.不允许有毛刺,边缘光滑,最大为R0.12.
4.直径小了不接受,如果直径大但不影响装配可以接受.
5.表面只允许有小毛刺.
因为简写太多,希望可以帮到你.
2.材质：高密集黄铜,C2P-2002,标准：35,密度：最小为7.7g/cm
3.不允许有毛刺,边缘光滑,最大为R0.12.
4.直径小了不接受,如果直径大但不影响装配可以接受.
5.表面只允许有小毛刺.
因为简写太多,希望可以帮到你.