英语翻译3 Sensors Two groups of inductance sensors are adopted.T
来源:学生作业帮 编辑:搜搜做题作业网作业帮 分类:英语作业 时间:2024/08/17 18:22:00
英语翻译
3 Sensors
Two groups of inductance sensors are adopted.The iron cores of both inductance sensors and magnetic poles are alternatively disposed (Fig.4).After the signals of sensors are processed,we can get coordinates of the rotor in the main control plane and displacements of the rotor plumbing the main control plane.
Inductance sensors detect the distance (airspace s) between the rotor and the iron cores through detecting the changes of loop sensors L.The calculation formula
for the sensor loop inductance is:
L means inductance,n means number of windings of the loop,μ0 means the magnetic constant in vacuum,s means the wide of the airspace,Al means gas gap cross section.Taylor expansion of the equation (1) at the balance place s=s0 and adopt the main item:
Let us put a group of sensors as examples in Fig.5.We can get the inductance difference between A and B in equation (3):The result that a group of sensors A and B do the differential is to prorate with the place change (Δs) at the balance place.The proportion modulus is k.The true measurement of the inductance A,B and the place change curve is demonstrated in Fig.6 and Fig.7.The differential curve of the sensor A and B is shown in Fig.8.At the balance place,the inductance difference shows linear relationship with the place of rotor.It inosculates well with the theoretically analytical results.Due to the certain angle formed between sensors and magnetic poles,the signal measured by sensors
should map to the coordinate directions in which magnetic poles are located,the mapping connection of (x,y) → (x′,y′) is:
3 Sensors
Two groups of inductance sensors are adopted.The iron cores of both inductance sensors and magnetic poles are alternatively disposed (Fig.4).After the signals of sensors are processed,we can get coordinates of the rotor in the main control plane and displacements of the rotor plumbing the main control plane.
Inductance sensors detect the distance (airspace s) between the rotor and the iron cores through detecting the changes of loop sensors L.The calculation formula
for the sensor loop inductance is:
L means inductance,n means number of windings of the loop,μ0 means the magnetic constant in vacuum,s means the wide of the airspace,Al means gas gap cross section.Taylor expansion of the equation (1) at the balance place s=s0 and adopt the main item:
Let us put a group of sensors as examples in Fig.5.We can get the inductance difference between A and B in equation (3):The result that a group of sensors A and B do the differential is to prorate with the place change (Δs) at the balance place.The proportion modulus is k.The true measurement of the inductance A,B and the place change curve is demonstrated in Fig.6 and Fig.7.The differential curve of the sensor A and B is shown in Fig.8.At the balance place,the inductance difference shows linear relationship with the place of rotor.It inosculates well with the theoretically analytical results.Due to the certain angle formed between sensors and magnetic poles,the signal measured by sensors
should map to the coordinate directions in which magnetic poles are located,the mapping connection of (x,y) → (x′,y′) is:
![英语翻译3 Sensors Two groups of inductance sensors are adopted.T](/uploads/image/z/4768100-44-0.jpg?t=%E8%8B%B1%E8%AF%AD%E7%BF%BB%E8%AF%913+Sensors+Two+groups+of+inductance+sensors+are+adopted.T)
3 感应器
二群感应系数感应器被采用.感应系数感应器和磁极的铁核心二者择一地被处理 (图 4) .在感应器的信号被处理之后,我们能在主要的控制飞机和使主要的控制飞机成垂直的转子的换置中拿转子的坐标.
感应系数感应器穿越发现转子和铁核心之间的距离 (上空 s) 发现环感应器 L.的变化计算公式对于感应器环感应系数是:
L 意谓感应系数,n 意谓环的卷的数字,μ 0个方法有磁性的常数在真空中,s 意谓上空的宽者,Al 方法瓦斯缝隙十字架区段.相等 (1) 的泰勒扩充在余款放置 s=s0 而且采用主要的项目:让我们放作为图 5 的例子一群感应器.我们能拿那感应系数不同在一之间和相等 (3) 的 B:结果一群感应器一和 B 做两路线的运费差额是在平衡地方以地方比例分配转乘 (Δ s).比例率是 k .感应系数 A 的真实测量、 B 和地方变化曲线在图 6 和图 7 被示范.感应器一的差别曲线和 B 在图 8 被显示.在平衡地方,感应系数不同表示和转子的地方的线关系.它以理论上分析的结果接合得好.由于在感应器和磁极之间被形成的特定的角度,被感应器测量的信号
应该在哪些磁极被位于映射同等的方向,映射连接 (x,y)->(x ′,y ′) 是:
二群感应系数感应器被采用.感应系数感应器和磁极的铁核心二者择一地被处理 (图 4) .在感应器的信号被处理之后,我们能在主要的控制飞机和使主要的控制飞机成垂直的转子的换置中拿转子的坐标.
感应系数感应器穿越发现转子和铁核心之间的距离 (上空 s) 发现环感应器 L.的变化计算公式对于感应器环感应系数是:
L 意谓感应系数,n 意谓环的卷的数字,μ 0个方法有磁性的常数在真空中,s 意谓上空的宽者,Al 方法瓦斯缝隙十字架区段.相等 (1) 的泰勒扩充在余款放置 s=s0 而且采用主要的项目:让我们放作为图 5 的例子一群感应器.我们能拿那感应系数不同在一之间和相等 (3) 的 B:结果一群感应器一和 B 做两路线的运费差额是在平衡地方以地方比例分配转乘 (Δ s).比例率是 k .感应系数 A 的真实测量、 B 和地方变化曲线在图 6 和图 7 被示范.感应器一的差别曲线和 B 在图 8 被显示.在平衡地方,感应系数不同表示和转子的地方的线关系.它以理论上分析的结果接合得好.由于在感应器和磁极之间被形成的特定的角度,被感应器测量的信号
应该在哪些磁极被位于映射同等的方向,映射连接 (x,y)->(x ′,y ′) 是:
英语翻译3 Sensors Two groups of inductance sensors are adopted.T
英语翻译The sensors are connected to a digital-analog-converter
英语翻译4.0.6 Adequate number of temperature sensors,temperature
英语翻译The operation of semiconductor chemical sensors is under
英语翻译In the context of ship survivability,sensors may represe
英语翻译ItemWhole bike PlasticsRear view mirrorSeatSpeed sensorS
英语翻译The media to which the pressure sensors are going to be
sensors for energy control
英语翻译GeneralAutofocus systems rely on one or more sensors to
英语翻译Batteries can power anything from small sensors to large
英语翻译Ultrasonic sensorUltrasonic sensors work on a principle
Two groups of students getting together are still one group.