英语翻译Test method1.1 rubbing test1.1.1 for printing on metal a
来源:学生作业帮 编辑:搜搜做题作业网作业帮 分类:英语作业 时间:2024/08/19 09:16:22
英语翻译
Test method
1.1 rubbing test
1.1.1 for printing on metal and chroming plate part surface.
(1) rubbing printing mark again by hand for 15s with a piece of cloth soaked with water.
(2) Rubbing the printing mark again by hand for 15s with a piece of cloth soaked ith petroleum spirit.
1.1.2 for printing on plastic part and painting part surface
(1) Close the standard weight with cloth,soak the alcohol sufficiently.
(2) Rubbing the printing mark 30 cycles,1 cycle is about 1 second.
1.2 tape test
Take another sample and cover the surface of the printing well and tightly with Scotch Tape 810 and then pull the tape away quickly at 30 degrees angle to attempt to chip or peel away the coating from the printing.
2 Accept standard
After rubbing test the marking shall be clearly legible,it shall not be easily possible to remove marking plates and they show no curling.After Tape test the printing shall not peel off,check the tape and surface of part.
3 Scope
This test cover normal printing on except MEW/Braun product.
4 Equipment
Petroleum spirit
Alcohol
Standard weight 0.5kg
Water
Cloth
Timer
Scotch tape 810
Test method
1.1 rubbing test
1.1.1 for printing on metal and chroming plate part surface.
(1) rubbing printing mark again by hand for 15s with a piece of cloth soaked with water.
(2) Rubbing the printing mark again by hand for 15s with a piece of cloth soaked ith petroleum spirit.
1.1.2 for printing on plastic part and painting part surface
(1) Close the standard weight with cloth,soak the alcohol sufficiently.
(2) Rubbing the printing mark 30 cycles,1 cycle is about 1 second.
1.2 tape test
Take another sample and cover the surface of the printing well and tightly with Scotch Tape 810 and then pull the tape away quickly at 30 degrees angle to attempt to chip or peel away the coating from the printing.
2 Accept standard
After rubbing test the marking shall be clearly legible,it shall not be easily possible to remove marking plates and they show no curling.After Tape test the printing shall not peel off,check the tape and surface of part.
3 Scope
This test cover normal printing on except MEW/Braun product.
4 Equipment
Petroleum spirit
Alcohol
Standard weight 0.5kg
Water
Cloth
Timer
Scotch tape 810
![英语翻译Test method1.1 rubbing test1.1.1 for printing on metal a](/uploads/image/z/17014799-47-9.jpg?t=%E8%8B%B1%E8%AF%AD%E7%BF%BB%E8%AF%91Test+method1.1+rubbing+test1.1.1+for+printing+on+metal+a)
测试方法
1.1摩擦测试
1.1.1对金属和镀铬板零件表面印刷.
(1)摩擦再次为商标印刷用布块用开水浸泡15秒手.
(2)磨痕再次为15秒打印手工用一块布浸湿第i个石油精神.
1.1.2塑料零件表面印刷和绘画的一部分
(1)关闭与布的标准体重,酒精浸泡充分.
(2)磨印刷商标30个循环,1周期约1秒.
1.2胶带测试
再举一个样,盖上苏格兰胶带810的印刷面和好,然后紧紧地拉在30度角的磁带迅速地离开,试图剥离芯片或从印刷涂布.
2接受标准
摩擦试验后的标志应清晰易读,不得轻易可以移除标志牌,他们表现出不卷曲.印刷胶带测试后应不脱落,检查磁带和零件表面.
3范围
该测试涵盖除水电部/布劳恩产品的正常打印.
4设备
汽油
酒精
标准重量0.5公斤
水
布
定时器
透明胶带810
1.1摩擦测试
1.1.1对金属和镀铬板零件表面印刷.
(1)摩擦再次为商标印刷用布块用开水浸泡15秒手.
(2)磨痕再次为15秒打印手工用一块布浸湿第i个石油精神.
1.1.2塑料零件表面印刷和绘画的一部分
(1)关闭与布的标准体重,酒精浸泡充分.
(2)磨印刷商标30个循环,1周期约1秒.
1.2胶带测试
再举一个样,盖上苏格兰胶带810的印刷面和好,然后紧紧地拉在30度角的磁带迅速地离开,试图剥离芯片或从印刷涂布.
2接受标准
摩擦试验后的标志应清晰易读,不得轻易可以移除标志牌,他们表现出不卷曲.印刷胶带测试后应不脱落,检查磁带和零件表面.
3范围
该测试涵盖除水电部/布劳恩产品的正常打印.
4设备
汽油
酒精
标准重量0.5公斤
水
布
定时器
透明胶带810
英语翻译Rubbing by cloth with water + metal stick which is 1kg a
英语翻译( high glossy ink for Screen Printing on water based (fo
英语翻译He served as a Director for the Sir Speedy printing fran
英语翻译海德堡的Devices for turning sheets in a rotary printing mach
英语翻译for example,one day she brought a toy printing machine t
they're rubbing off on
on a test
study for a test
on a test or in a test?
英语翻译Preparing students for a “standardized” math test throug
英语翻译Test Method for Metallic Bone Plates F382,specifically A
英语翻译11.Metal Logo 1pc each on top left drawer -- Cindy notes